| Common apparatus |
|---|
| Hydraulic system |
| Electronic components |
| Data acquisition |
| EMG monitoring |
| NLID Tools |
| Troubleshooting |
| Materials |
| Supine apparatus |
|---|
| Assembly procedure |
| Safety Measures |
| Components |
| Servovalve |
| Actuator |
| Potentiometer |
| Pressure Filter |
| Torque transducer |
| Boot |
| Literature |
| Computing resources |
|---|
| CVS |
| Ethics |
|---|
| SDS / Inventory |
|---|
Angular Sensors - standing
The MicroStrain®
FAS-G™ inclinometer combines an angular rate gyro with two orthogonal
DC accelerometers, 12 bit A/D converter, multiplexer, microcontroller,
and D/A converter to provide an analog voltage linearly proportional to
inclination in dynamic and static environments.
Operating over the full 360 degrees of angular motion, FAS-G is versatile by design. The additional digital serial output can be programmed to provide either compensated angles or raw sensor data. The digital output modes and software filter parameters are user programmable. All programmed parameters are stored in nonvolatile memory.
FAS-G Gyro Enhanced Inclinometer with Analog Output
Specifications
- Calibration Certificate (SN 1407) (Scan)
- Calibration Certificate (SN 1050) (Scan)
- Calibration Certificate (SN 1051) (Scan)
| Range | Single axis (roll) 360 degrees |
| A/D Resolution | 12 bits |
| D/A Resolution | 12 bits |
| Dynamic Compensation | Closed loop digital control (0 to 50 Hz) |
| Angle Resolution | Roll: < 0.1 degrees (angle resolution specs. taken at most aggressive setting) |
| Temperature Drift | +/- 0.025%/deg C |
| Nonlinearity | 0.23% full scale (static) |
| Repeatability | 0.10 degrees |
| Accuracy | Roll: +/-1.0 degrees typical |
| Output Data Rate | 150 Hz (digital and analog) |
| Output Modes | single axis: 0-360 deg; angular rate: 300 deg/sec; accelerometer: ax, ay Bits) |
| Output Format | RS-232 serial or analog (0-4.096v) |
| Transmission Rate | 19200 bits/sec |
| Supply Voltage | +5.2 VDC min., +12 VDC max. |
| Supply Current | 30 milliamps |
| Connector | 8 pin mini DIN |
| Operating Temperature | -40 to +50 deg Celsius |
| Enclosure (w/tabs) | 64mm by 90 mm by 25mm; 2.5" by 3.5"' by 1.0" |
| Shock Limit | 1000g (unpowered); 500g (powered) |
Subject Fixation
The sensor is attached to the subject's skin via medical-grade, double-sided,
adhesive tape. The supplier is:
Discount Hair Replacement Systems & Supplies
4576 Yonge Street, Suite 102
Toronto, Ontario
M2N 6N4
Tel: 1-888-286-3115
Web site
Products:
MO1134 - Small Cloth Medical Adhesive Role (3/4" x 3 yds.)
MO1135 - Large Cloth Medical Adhesive Role (3/4" x 36 yds.)
Last modified: 2006-10-05 Ross Wagner